ABOUT US

MORE

  • About us

    Suzhou Kelan Environmental Technology Co., Ltd. relies on more than 140 years of technology and experience accumulated in Germany, focuses on the management and operation of industrial volatile organic waste gas, and is committed to providing customers with full life cycle system solutions with high purification efficiency and low operational energy consumption.

    MORE

  • History

    CN-KELAN focuses on R&D, design, manufacturing, operation and maintenance management of industrial VOC exhaust gas treatment systems, and has grown into a " Professional, fine-tuned, special, innovative " enterprise in the field of thermal oxidation technology. CN-KELAN has become the partner of famous enterprises such as CNPC, SINOPEC, BASF, WANHUA, HENGLI Petrochemical, Great Wall Motors, Minth Group, Rainbow Group and so on.

    MORE

  • R&D & Innovation

    Innovation is an important way to promote the green transformation and sustainable development of enterprises. CN-KELAN attaches great importance to R&D and innovation, focuses on cultivating innovative talents, with R&D personnel accounting for more than 40%, and constantly improves the innovation mechanism, inpput constant power for the sustainable and healthy development of the enterprise.

    MORE

  • Manufacture Base

    The manufacture base of CN-KELAN Environmental Technology Co., Ltd. is located in Liyang City, Jiangsu Province. At present, it has more than 30,000 square meters of standard production plant, over 5,000 square meters of office facilities and supporting R & D space and production and testing center, nearly 100 sets of various complete sets of R & D and production equipment, and a sound team of technological talents.

    MORE

Good for the environment, Profitable for your company

The company has a professional process, design, manufacturing, installation, commissioning and after-sales team, adhering to the German more than 140 years of technical experience accumulated.

SOLUTIONS

MORE

  • Regenerative Thermal Oxidation(RTO)

    This equipment is used to purify industrial exhaust gases and uses ceramic heat storage materials to efficiently process the exhaust gases generated and collected in all stages of production, realizing economic energy savings. When the exhaust air volume is very large, the equipment can also be operated according to the system optimization. Under suitable solvent concentration conditions, the system can realize self-heating operation.

    MORE

  • SMARTRTO

    SMARTRTO is an intelligent, modular, heat storage type thermal oxidation exhaust gas purification equipment. With plug-and-play features, it is a new generation of intelligent products based on the traditional RTO architecture, breaking through the traditional concept of engineering equipment, with a new product design concept, integrating the heat storage box, reaction chamber, air duct system and other functional modules, flexible design. Therefore, the equipment is characterized by safety and reliability, environmental protection, energy saving, economic investment and easy operation and maintenance. In addition, this equipment can provide rental services.

    MORE

  • Catalytic Oxidation(CO)

    The equipment purifies industrial exhaust gases by catalytic oxidation in a low-temperature oxidation chamber. The use of a high-efficiency plate heat exchanger enables self-heating operation even when the concentration of exhaust gases is not high.

    MORE

  • Regenerative Catalytic Oxidation(RCO)

    This equipment is used in the working condition of simple exhaust gas composition and low to medium concentration. The catalyst unit module is added to the heat storage layer of the thermal oxidation device, and the catalytic oxidation technology is used to realize the self-heating operation of the treatment device in the case of low concentration of exhaust gas.

    MORE

  • Thermische Nachverbrennung(TNV)

    For the purification of industrial exhaust gases containing high concentrations of organic pollutants, the INTEGRA and FLEXA series of units are characterized by a high level of utilization of the heat in the system. In combination with a downstream heat recovery system the complete unit has low operating costs and requires only a small amount of external fuel heating.

    MORE

  • Thermal Oxidizer (TO)

    This equipment is used to deal with hazardous waste incineration, as well as petrochemical, pharmaceutical and other industries generated by the medium and high concentration of waste gas and waste liquids, especially suitable for waste gas from many sources, and there are large changes in air volume, components, concentration and other working conditions.

    MORE

  • Rotary Concentrator(RC)

    This equipment is particularly suitable for the treatment of large flows of low concentration exhaust gases. The system uses a continuously rotating rotor made of hydrophobic zeolites to absorb organic matter. Subsequently, the absorbed pollutants are desorbed by hot air and fed into the exhaust gas cleaning unit for treatment.

    MORE

  • Selective Catalytic Reduction(SCR)

    Under the action of a catalyst, the exhaust gas is selectively reacted with NOx in the flue gas using a reducing agent (e.g., NH3, liquid ammonia, urea) and generates non-toxic and non-polluting N₂ and H₂O.

    MORE

  • Pulse Dust Precipitator

    Pulse dust collector is a new type of high efficiency dust collector developed on the basis of conventional dust collector. It not only synthesizes the advantages of compartmentalized blowback and pulse blowing cleaning, but also lengthens the filter bag, gives full play to the role of strong blowing cleaning under low air pressure, overcomes the drawback of low intensity of compartmentalized blowback cleaning, has the advantages of pulse blowing cleaning and dust filtration at the same time, prevents dust re-attachment and loss of control, thus improving the filtration speed, saving the energy consumption of dust cleaning and prolonging the service life of the filter bag.

    MORE

APPLICATION

MORE

NEWS

MORE
2024-12-06

Suzhou Kelan helps automotive industry VOCs treatment green, low-carbon sustainable development！

From December 5 to 7, 2024 APS Automotive Parts Surface Technology Conference, organized by Material & Coatings, was successfully held in Wuxi.Suzhou Kelan Environmental Techno...

After Sales

Read More

CONTACT US

  • (+86)0512-5039055 18151781893
  • office@cn-kelan.cn
  • Headquarter: Room 402-409, Taixie International Business Plaza, 399 Qianjin East Road, Kunshan City, Jiangsu Province
  • Manufacturing：39 Maochang Road, Kunlun Street, Liyang City, Jiangsu Province

  • Official WeChat

ABOUT US

Company Profile
History
R&D Innovation
Manufacturing Base
NEWS
Brand Declaration

SOLUTIONS

Regenerative Thermal Oxidation(RTO)
SMARTRTO
Catalytic Oxidation(CO)
Regenerative Catalytic Oxidation(RCO)
Thermische Nachverbrennung(TNV)
Thermal Oxidizer (TO)
Rotary Concentrator(RC)
Selective Catalytic Reduction(SCR)
Pulse Dust Precipitator

CASES

Petrochemical
Fine Chemical
Coal Chemical
Painting
Coating
Rubber
Other

AFTER SALES

Breakdown Repairs
Maintenance and Upkeep
Upgrading and Remodeling
Spare Parts and Accessories
Copyright © 2023 Suzhou Kelan Environmental Technology Co., Ltd.. All Rights Reserved 苏ICP备14051670号-2
Link:www.krantz.de